Viewing Vpn Client Connection Status - Cisco RV180 Administrator's Manual
Hide thumbs
Also See for RV180:
- Administration manual (187 pages) ,
- Manual (14 pages) ,
- Datasheet (5 pages)
Table of Contents
Advertisement
Viewing the Cisco RV180/RV180W Status
Viewing VPN Client Connection Status
Viewing VPN Client Connection Status
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV180/RV180W Administration Guide
State
Action
The VPN Client Connection Status page displays the status of VPN connections.
To view VPN user connection status:
Choose Status > VPN Client Connection Status.
Click Stop.
In the Poll Interval field, enter the number of seconds the router waits before
updating the information on this page.
Click Start to restart automatic refresh at the specified poll interval.
The VPN Client Connection Status page displays this information:
Username
Remote IP
Status
Start Time
The current status of the SA for IKE policies. The
status can be IPsec SA Established or IPsec SA
Not Established.
Click Connect to establish an inactive SA
connection.
Click Drop to terminate an active SA connection.
The username of the VPN user associated with the
QuickVPN or PPTP tunnel.
Displays the IP address of the remote QuickVPN
client. This could be a NAT/Public IP if the client is
behind the NAT router.
Displays the current status of QuickVPN client.
OFFLINE means that QuickVPN tunnel is not
initiated/established by the VPN user. ONLINE
means that QuickVPN Tunnel, initiated/established
by the VPN user, is active.
The time of the VPN user establishing a connection.
8
164
Advertisement
Table of Contents
