Table of Contents
Advertisement
Ext. Fan(s) Configuration
ASUS FAN EXTENSION CARD is required to configure these items
Extension Fan 1-3 Q-Fan Control [DC Mode]
[Disabled]
[DC mode]
[PWM mode]
Extension Fan 1-3 Q-Fan Source [CPU]
The assignment fan will be controlled according to the selected temperature source.
Configuration options: [CPU] [MotherBoard] [PCH Core] [VCORE] [VCORE(BACK)]
[DRAM] [PCH] [USB3.1] [PCIE-1] [PCIE-2] [T_Sensor1] [T_Sensor2] [T_Sensor3]
[EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3]
For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place the
other end to the component to get the temperature.
Extension Fan 1-3 Fan Speed Low Limit [200 RPM]
This item allows you to disable or set the extension fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Extension Fan 1-3 Profile [Standard]
This item allows you to set the appropriate performance level of the extension fan.
[Standard]
[Silent]
[Turbo]
[Manual]
The following items appear only when you set the Extension Fan Profile to [Manual].
3-42
ASST Fan 1-2 Lower Temperature [40]
Use the <+> or <-> keys to adjust the lower limit of the Assistant Fan 1-2
temperature. The values range from 20 to 75. The Assistant Fan 1-2 will
operate at the minimum duty cycle when the temperature is lower than the
limit.
ASST Fan 1-2 Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum Assistant Fan 1-2 duty
cycle. The values range from 0% to 100%. When the CPU temperature
is under the limit, the Assistant Fan 1-2 will operate at the minimum duty
cycle.
Allow Fan Stop [Disabled]
This item allow the fan to run at 0% duty cycle when the temperature of the
source is dropped below the lower temperature.
Configuration options: [Disabled] [Enabled]
Disable the Extension Fan Q-Fan control feature.
Enable the Extension Fan Q-Fan control in DC mode for 3-pin chassis
fan.
Enable the Extension Fan Q-Fan control in PWM mode for 4-pin
chassis fan.
Set to make the extension fan adjust automatically depending on the
CPU temperature.
Set to minimize the fan speed for quiet extension fan operation.
Set to achieve maximum extension fan speed.
Set to assign the detailed fan speed control parameters.
Chapter 3: BIOS Setup
Hide quick links:
Advertisement
Table of Contents
