Sony WM-FX277 Service Manual page 7
Hide thumbs
Also See for WM-FX277:
- Service manual (24 pages) ,
- Operating instructions (2 pages) ,
- Operating instructions (2 pages)
Table of Contents
Advertisement
TUNER SECTION
0 dB = 1µ V
AM Section
BAND : AM
AM RF signal
generator
30% amplitude modulation by 400Hz
signal.
Output level : as low as possible
TV/FM Section
BAND : TV or FM
TP
0.01µF
(FM/TV IN)
[MAIN BOARD]
(Side B)
set
phones jack (J301)
Put the lead-wire
antenna close to
the set.
FM RF signal
generator
22.5kHz frequency deviation
by 400Hz signal.
Output level :
as low as possible
level meter
32 Ω
• Repeat the procedures in each adjustment several times, and the
frequency coverage and tracking adjustments should be finally
done by the trimmer capacitors.
AM IF ADJUSTMENT
Adjust for a maximum reading on level meter.
RV2
AM FREQUENCY COVERAGE ADJUSTMENT
Adjust parts
Frequency display
Confirmation
L7
AM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L3
CT1
TV and FM FREQUENCY COVERAGE CONFIRMATION
Frequency display
Confirmation
2CH (TV)
Confirmation
108MHz (FM)
FM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L4
Confirmation
TV TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L5
Confirmation
Adjustment Location :
Frequency Coverage Adjustment
Setting :
[MAIN BOARD]
(Side B)
– 7 –
450kHz
Reading on digtal
voltmeter
530kHz
Standard value : 3V or less
Adjustment value : 10.0V
1,710kHz
Standard value : 9.9-10.1V
620kHz
1,400kHz
Reading on digtal voltmeter
Standard value : 1.6 - 2.2V
Standard value : 11.0V or less
98MHz
108MHz
2CH
13CH
Main board (See page 8)
digital voltmeter
TP (VT)
TP (GND)
TP
(VT)
(DC range)
Hide quick links:
Advertisement
Table of Contents
