Table of Contents
Advertisement
Ordering
Equipment combinations
Mechanical design
Operator controls
and indication
Note
Rocker switch for mode
selection and fan speed
2/8
Siemens
Building Technologies
When ordering, please specify the quantity, product name and type code.
Example:
30
Room units
The room unit is suitable for use in conjunction with all controllers which incorporate a
PPS2 room unit interface (e.g. DESIGO RX, DESIGO PX).
The room unit is designed for surface mounting (with knock-outs for cable entry from
the top or bottom) or for mounting on a recessed conduit box with the cables connected
from the rear.
The unit comprises a housing and base unit, connected by releasable snap-fittings.
The base unit accommodates the screw terminals which have an integrated terminal
strip.
The housing accommodates a printed circuit board, room temperature sensor element,
setpoint adjuster, rocker switch for mode selection and fan speed selection, plug-in
connectors and a socket for the commissioning and service tool or service terminal.
Both the housing and base are made of plastic.
Base unit
Housing
80166A
The actual functions of the operator controls and indicators are determined by the con-
troller (based on the selected application and associated parameters). The description
below covers all possibilities for these items.
The controller control mode can be selected on the basis of occupancy, using the
rocker switch on the room unit. The same switch can also be used for manual selection
of up to three fan speeds.
QAX34.1 – Room unit with PPS2 interface
QAX34.1
80083
Room temperature display and sequence (heating or cooling)
Rocker switch for room temperature setpoint adjustment
Indication of current control mode or current fan speed
Rocker switch for mode selection and fan speed
80084
Socket for the commissioning
and service tool or service
terminal
CA2N1645en_02
30 Jun 2009
Hide quick links:
Advertisement
Table of Contents
