Fitting Other Guards And Cutting Attachments; Adjusting The Harness And Clearing Saw; Standard Harness - Husqvarna 343F Operator's Manual
Hide thumbs
Also See for 343F:
- Operator's manual (52 pages) ,
- Workshop manual (63 pages) ,
- Operator's manual (40 pages)
Table of Contents
Advertisement
•
Fit the drive disc (B) on the output shaft.
H
P
B
C
•
Centre the metal cup (P) on the drive disc's blade guide.
•
Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
•
Insert the locking pin (C) in the hole to lock the shaft.
•
Screw on the trimmer head (H) in the opposite direction
to the direction of rotation.
H
C
•
Tighten the trimmer head to a torque of 35-50 Nm (3.5-5
kpm).
•
To dismantle, follow the instructions in the reverse order.
Fitting other guards and cutting
attachments
•
Fit the trimmer guard/combination guard (A) intended for
use with the trimmer head/plastic blades. Hang the
trimmer guard/combination guard (A) on the two hooks
on the plate holder (M). Bend the guard around the shaft
and tighten it with the bolt (L) on the opposite side of the
shaft. Use the locking pin (C). Place the locking pin in the
groove on the screw head and tighten. See diagram.
M
A
ASSEMBLY
L
C
•
Fit the drive disc (B) on the output shaft.
H
P
B
C
•
Centre the metal cup (P) on the drive disc's blade guide.
•
Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
•
Insert the locking pin (C) in the hole to lock the shaft.
•
Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
•
To dismantle, follow the instructions in the reverse order.
Adjusting the harness and clearing
saw
WARNING! When using a clearing saw it
!
must always be hooked securely to the
harness. Otherwise you will be unable to
control the clearing saw safely and this can
result in injury to yourself or others. Never
use a harness with a defective quick
release.
Standard harness
Safety release
At the front is an easily accessible, quick release. Use this if
the engine catches fire or in any other emergency situation
that requires you to free yourself from the machine and
harness.
–
English
17
- Quick Links:
- Starting and Stopping
- Carburettor
- Technical Data
Hide quick links:
Advertisement
Table of Contents
