HP ENVY Maintenance And Service Manual page 60

Hide thumbs Also See for ENVY:

Table of Contents

●

If it is necessary to replace the webcam/microphone module:

Remove the display bezel.

Remove the display panel.

Release the two pieces of grounding tape (1) the secure the webcam/microphone module cable to

the display back cover.

Disconnect the webcam/microphone module cable (2) from the webcam/microphone module.

Detach the webcam/microphone module (3) from the display back cover. (The webcam/

microphone module is attached to the display back cover with double-sided adhesive.)

NOTE:

isolators (4) do not get lost. These isolators are important to the microphone performance.

Remove the webcam/microphone module.

The webcam/microphone module is available using spare part numbers 854982-001 (for use only

on computers with model numbers 13-d100 through 13-d199) and 833512-001 (for use only on

computers with model numbers 13-d000 through 13-d099).

If it is necessary to replace the display hinges:

Chapter 5 Removal and replacement procedures

848177-001 – 13.3-in, RGBW QHD+, WLED, BrightView (3200×1800), ultraslim-flat (2.6-mm),

UWVA display panel for use only on computers with model numbers 13-d100 through 13-

d199

815165-001 – 13.3-in, RGBW QHD+, WLED, BrightView (3200×1800), ultraslim-flat (2.6-mm),

UWVA display panel for use only on model numbers 13-d000 through 13-d099

848178-001 – 13.3-in, FHD, WLED, AntiGlare (1920×1080), ultraslim-flat (2.6-mm), UWVA

display panel for use only on computers with model numbers 13-d100 through 13-d199

830567-001 – 13.3-in, FHD, WLED, AntiGlare (1920×1080), ultraslim-flat (2.6-mm), UWVA

display panel for use only on model numbers 13-d000 through 13-d099

When releasing the webcam/microphone module, make sure the microphone rubber

Table of Contents

Show Quick Links

Table of Contents

13-d000 13-d099 13-d100 13-d199