Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual page 196
Computer numeric control
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
...
196
2.
Switch to "JOG" mode.
3.
Open the list of work offsets.
4.
Open the window for measuring the work offsets. Note that this vertical softkey is active only
in "JOG" mode.
5.
Press the vertical softkey to select the required measuring direction.
6.
Traverse the tool, which has been measured previously, to approach the workpiece in the Z
direction.
7.
Switch to handwheel mode.
8.
Select a suitable override feedrate, and then use the handwheel to move the tool to scratch
the required workpiece edge or the edge of the setting block, if a setting block is used.
9.
Select the offset plane to save in (for example, G54).
10.
Enter the distance (for example, "0").
Press this key or move the cursor to confirm your input.
11.
Press this vertical softkey. The work offset of the Z axis is calculated automatically and
displayed in the offset field.
12.
Repeat the above operations to set the work offset in the "X" axis.
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015
Hide quick links:
Advertisement
Table of Contents
