Kinematic Transformation; Milling On Turned Parts (Transmit) - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual
Computer numeric control
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
N70 X50 F0.1
N80 G500 X100 Z170
N90 M30
8.2.8
Kinematic transformation
8.2.8.1
Milling on turned parts (TRANSMIT)
Function
The TRANSMIT function enables the following:
● Face machining on turned parts in the turning clamp (drill-holes, contours).
● A cartesian coordinate system can be used to program these machining operations.
● The controller maps the programmed traversing movements of the Cartesian coordinate system onto the traversing
movements of real machine axes (standard situation):
–
Rotary axis:
The main spindle functions here as the machine rotary axis.
–
Infeed axis perpendicular to rotary axis
–
Longitudinal axis parallel to rotary axis
–
The linear axes are positioned perpendicular to one another.
● A tool center offset relative to the turning center is permitted.
● The velocity control makes allowance for the limits defined for the rotations.
● In addition to the tool length compensation, it is also possible to work with the tool radius compensation (G41, G42).
TRANSMIT transformation type
TRANSMIT in the standard case with (TRAFO_TYPE_n = 256)
Syntax
TRANSMIT
TRAFOOF
Rotary axis
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015
61
Hide quick links:
Advertisement
Table of Contents
