Cisco 1941W Configuration Manual page 270
Cisco 3900 series, cisco 2900 series,
cisco 1900 series
Hide thumbs
Also See for 1941W:
- Hardware installation manual (102 pages) ,
- Installing and upgrading (24 pages)
Table of Contents
Advertisement
Enabling the Radio Interface
To enable the access point radio, follow these steps, beginning in privileged EXEC mode.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
DETAILED STEPS
Command
Step 1
configure terminal
Step 2
dot11 ssid ssid
Step 3
interface dot11radio {0| 1}
Step 4
ssid ssid
Step 5
no shutdown
Step 6
end
Step 7
copy running-config startup-config (Optional) Saves your entries in the configuration file.
Use the shutdown command to disable the radio port.
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
262
configure terminal
dot11 ssid ssid
interface dot11radio {0| 1}
ssid ssid
no shutdown
end
copy running-config startup-config
Purpose
Enters global configuration mode.
Enters the SSID. The SSID consists of up to 32 alphanumeric
characters. SSIDs are case sensitive.
Enters interface configuration mode for the radio interface.The
2.4-GHz and 802.11g/n 2.4-GHz radios are radio 0.
The 5-GHz and the 802.11n 5-GHz radio is radio 1.
Assigns the SSID that you created in Step 2 to the appropriate
radio interface.
Enables the radio port.
Returns to privileged EXEC mode.
Chapter
Configuring Radio Settings
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
