CFM Support on Routed Port and Port MEP
100
7
-
400
6
-
44
2
-
Total Remote MEPs: 3
Router2#
Use the show ethernet cfm error configuration command to view Ethernet CFM configuration errors
(if any). The following is a sample output of the show ethernet cfm error configuration command:
Router#show ethernet cfm error configuration
--------------------------------------------------------------------------------
CFM Interface
--------------------------------------------------------------------------------
Gi0/2
Configuring Ethernet CFM (Double-Tagged Packets)
Complete these steps to configure and enable Ethernet CFM for double-tagged packets:
SUMMARY STEPS
enable
Step 1
Step 2
configure terminal
Step 3
ethernet cfm ieee
ethernet cfm global
Step 4
ethernet cfm domain domain-name level value
Step 5
service service-name vlan vlan-id inner-vlan inner-vlan-id direction down
Step 6
continuity-check
Step 7
interface gigabitethernet slot/port
Step 8
ethernet cfm mep domain domain-name mpid mpid-value service service-name
Step 9
interface gigabitethernet slot/port.subinterface
Step 10
encapsulation dot1q vlan-id second-dot1q inner vlan-id
Step 11
end
Step 12
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
48
Chapter
customer
customer
customer1101
N/A
MPID: 110 Domain: customer MA: customer1101
enterprise
enterprise
custservice
N/A
MPID: 410 Domain: enterprise MA: custservice
carrier
carrier
carrier
N/A
MPID: 43
Domain: carrier MA: carrier
Type
Id
S,C
100
Configuring Ethernet CFM and Y.1731 Performance Monitoring on Layer 3 Interfaces
0026.99f7.0b41
Up
Gi0/2
Vlan 100
N/A
2s
0026.99f7.0b41
Up
Gi0/1
Vlan 110
N/A
2s
0026.99f7.0b41
Up
Gi0/2
Vlan 200
N/A
2s
Level
Error type
5
CFMLeak
Up
Up
Up