Siemens SINUMERIK 840D Operator's Manual page 164
Computerized
numerical control system for machine tools
Hide thumbs
Also See for SINUMERIK 840D:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating turning (713 pages)
Table of Contents
Advertisement
5
Parameters Operating Area
5.4 ShopMill tool management
Specify an empty
location
Tool list
Relocate
Spindle
Find an empty location
Relocate
5-164
Select the "Tool list" softkey.
Place the cursor on the tool that you wish to relocate to a different
magazine location.
Press the "Relocate" softkey.
The "Empty location" window appears. The "Location" field is
initialized with the number of the first empty magazine location.
Press the "OK" softkey to relocate the tool to the suggested location.
-or-
Enter the location number you require and press the "OK" softkey.
-or-
Press the "Spindle" and "OK" softkeys to load a tool into the spindle.
The tool is relocated to the specified magazine location.
Press the "Relocate" softkey.
The "Empty location" window appears. The "Location" field is
initialized with the number of the first empty magazine location.
Enter the magazine number and a "0" for the location number if you
wish to search for an empty location in a particular magazine.
-or-
Enter a "0" for the magazine number and location number if you wish
to search for an empty location in all magazines.
Press the "OK" softkey.
An empty location is suggested.
Press the "OK" softkey.
The tool is relocated to the suggested magazine location.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5
03.04
Siemens AG, 2004. All rights reserved
Advertisement
Table of Contents
