Function Scope - Siemens SINUMERIK 840D Operator's Manual
Computerized
numerical control system for machine tools
Hide thumbs
Also See for SINUMERIK 840D:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating turning (713 pages)
Table of Contents
Advertisement
5
03.04
References
5.5.1 Function Scope
Tool types
Tool parameters
Magazine parameters
Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5.5 Tool management ShopTurn
/BAT/ Operator's Guide ShopTurn/Tool Management
/FBW/ Description of Functions Tool Management or
/FBT/ Description of Functions ShopTurn
Function
ShopTurn tool management supports the following tool types, tool
parameters and magazine parameters:
You can create up to 250 tools under PCU 20.
You can create up to 98 replacement tools for each tool.
–
Roughing tool
–
Finishing tool
–
Recessing tool
–
Milling tool
–
Drill
–
Button
Limit stop
–
Threading tool
–
Rotary drill
–
3D_probe
–
–
Magazine location/magazine number
–
Tool type
–
Tool name
–
Duplo number
–
Tool length compensation in the X direction
–
Tool length compensation in the Z direction
–
Wear radius
–
Tip length of a cutting tool or a grooving cutter
–
Tip width of a grooving tool
–
Angle of teeth for a milling cutter
–
Angle of tool tip on a drill
–
Type of tool monitoring: optionally according to tool life or tool
change in relation cutting edge.
Tool state: Tool disabled
–
Tool state: Tool oversized (right and left half locations)
–
Magazine location disabled
–
Parameters Operating Area
5
5-167
Advertisement
Table of Contents
