Execute Program From Network Drive, Compact Flash Card, Disk - Siemens SINUMERIK 840D Operator's Manual
Computerized
numerical control system for machine tools
Hide thumbs
Also See for SINUMERIK 840D:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating turning (713 pages)
Table of Contents
Advertisement
7
Services Operating Area
7.5 Main services screen
7.5.9
Execute program from network drive, Compact Flash Card, disk
References
More
Network
Compact
drive
Flash Card
Disk
Start
7-274
Function
If the "Network and disk drive management on PCU 20" option is
enabled, you can connect the control to an external network drive (up
to a max. of 4 drives) connected to the PCU or another computer and
select and run programs from there.
The function is also available in the "Program" operating area.
Prerequisite:
•
The computer you want to connect is accessible/enabled.
•
The connection is set up to the computer.
•
The softkeys for linking computers have been configured via the
machine data.
/IAM/IM2, Installation & Start-Up Guide HMI Embedded
Operating sequence
Use the "More" softkey to display the configured softkeys for the
external drive or computer on a second vertical bar.
When you select one of the configured softkeys, e.g. "Network drive",
"Compact Flash Card" or "Disk", the Explorer appears on the screen
with the files and programs of the external drive.
Select the program that you want to execute with the cursor and then
press the "Start" softkey.
Further information
Direct execution from a network drive is not recommended, as the
stability and dynamic response of all networks cannot be guaranteed.
Recommendation:
Copy the programs from the network onto the compact flash card on
the PCU20 and run them from there.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
7
03.04
Siemens AG, 2004. All rights reserved
Advertisement
Table of Contents
