Cisco Catalyst 3560-X Software Configuration Manual page 1340
Hide thumbs
Also See for Catalyst 3560-X:
- Command reference manual (1188 pages) ,
- Software configuration manual (1438 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Implementing IPv6 Multicast
Command
Step 3
exit
Example:
Switch(config)# exit
Step 4
show ipv6 pim [vrf vrf-name] interface
[state-on] [state-off] [type number]
Example:
Switch# show ipv6 pim interface
Step 5
show ipv6 pim [vrf vrf-name] group-map
[group-name | group-address] | [group-range |
group-mask] [info-source {bsr | default |
embedded-rp | static}]
Example:
Switch# show ipv6 pim group-map
Step 6
show ipv6 pim [vrf vrf-name] neighbor [detail]
[interface-type interface-number | count]
Example:
Switch# show ipv6 pim neighbor
Step 7
show ipv6 pim [vrf vrf-name] range-list[config]
[rp-address | rp-name]
Example:
Switch# show ipv6 pim range-list
Step 8
show ipv6 pim [vrf vrf-name] tunnel
[interface-type interface-number]
Example:
Switch# show ipv6 pim tunnel
Step 9
debug ipv6 pim [group-name | group-address |
interface interface-type | bsr | group | mvpn |
neighbor]
Example:
Switch# debug ipv6 pim
Step 10
copy running-config startup-config
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
1-20
Purpose
Exits global configuration mode, and returns the switch to
privileged EXEC mode
Displays information about interfaces configured for PIM.
Displays an IPv6 multicast group mapping table.
Displays the PIM neighbors discovered by the Cisco IOS
software.
Displays information about IPv6 multicast range lists.
Displays information about the PIM register encapsulation and
de-encapsulation tunnels on an interface.
Enables debugging on PIM protocol activity.
(Optional) Save your entries in the configuration file.
Chapter 1
Implementing IPv6 Multicast
OL-25303-03
Advertisement
Table of Contents
Troubleshooting
