Cisco Catalyst 3560-X Software Configuration Manual page 268
Hide thumbs
Also See for Catalyst 3560-X:
- Command reference manual (1188 pages) ,
- Software configuration manual (1438 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Controlling Switch Access with RADIUS
This example shows how to provide a user logging in from a switch with immediate access to privileged
EXEC commands:
cisco-avpair= "shell:priv-lvl=15"
This example shows how to specify an authorized VLAN in the RADIUS server database:
cisco-avpair= "tunnel-type(#64)=VLAN(13)"
cisco-avpair= "tunnel-medium-type(#65)=802 media(6)"
cisco-avpair= "tunnel-private-group-id(#81)=vlanid"
This example shows how to apply an input ACL in ASCII format to an interface for the duration of this
connection:
cisco-avpair= "ip:inacl#1=deny ip 10.10.10.10 0.0.255.255 20.20.20.20 255.255.0.0"
cisco-avpair= "ip:inacl#2=deny ip 10.10.10.10 0.0.255.255 any"
cisco-avpair= "mac:inacl#3=deny any any decnet-iv"
This example shows how to apply an output ACL in ASCII format to an interface for the duration of this
connection:
cisco-avpair= "ip:outacl#2=deny ip 10.10.10.10 0.0.255.255 any"
Other vendors have their own unique vendor-IDs, options, and associated VSAs. For more information
about vendor-IDs and VSAs, see RFC 2138, "Remote Authentication Dial-In User Service (RADIUS)."
Beginning in privileged EXEC mode, follow these steps to configure the switch to recognize and use
VSAs:
Command
Step 1
configure terminal
Step 2
radius-server vsa send [accounting |
authentication]
Step 3
end
Step 4
show running-config
Step 5
copy running-config startup-config
For a complete list of RADIUS attributes or more information about vendor-specific attribute 26, see the
"RADIUS Attributes" appendix in the Cisco IOS Security Configuration Guide, Release 12.4.
Configuring the Switch for Vendor-Proprietary RADIUS Server Communication
Although an IETF draft standard for RADIUS specifies a method for communicating vendor-proprietary
information between the switch and the RADIUS server, some vendors have extended the RADIUS
attribute set in a unique way. Cisco IOS software supports a subset of vendor-proprietary RADIUS
attributes.
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
1-36
Purpose
Enter global configuration mode.
Enable the switch to recognize and use VSAs as defined by RADIUS IETF
attribute 26.
(Optional) Use the accounting keyword to limit the set of recognized
•
vendor-specific attributes to only accounting attributes.
(Optional) Use the authentication keyword to limit the set of
•
recognized vendor-specific attributes to only authentication attributes.
If you enter this command without keywords, both accounting and
authentication vendor-specific attributes are used.
Return to privileged EXEC mode.
Verify your settings.
(Optional) Save your entries in the configuration file.
Chapter 1
Configuring Switch-Based Authentication
OL-25303-03
Advertisement
Table of Contents
Troubleshooting
