Token Ring Vlans - Cisco Catalyst 3560-X Software Configuration Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Command reference manual (1188 pages) ,
- Software configuration manual (1438 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Chapter 1
Configuring VLANs
•
•
•
•
•
•
This section does not provide configuration details for most of these parameters. For complete
Note
information on the commands and parameters that control VLAN configuration, see the command
reference for this release.
These sections contain normal-range VLAN configuration information:
•
•
•
•
•
•
•
•
Token Ring VLANs
Although the switch does not support Token Ring connections, a remote device such as a Catalyst 5000
series switch with Token Ring connections could be managed from one of the supported switches.
Switches running VTP Version 2 advertise information about these Token Ring VLANs:
•
•
For more information on configuring Token Ring VLANs, see the Catalyst 5000 Series Software
Configuration Guide.
Normal-Range VLAN Configuration Guidelines
Follow these guidelines when creating and modifying normal-range VLANs in your network:
•
•
•
OL-25303-03
Security Association Identifier (SAID)
Bridge identification number for TrBRF VLANs
Ring number for FDDI and TrCRF VLANs
Parent VLAN number for TrCRF VLANs
Spanning Tree Protocol (STP) type for TrCRF VLANs
VLAN number to use when translating from one VLAN type to another
Token Ring VLANs, page 1-5
Normal-Range VLAN Configuration Guidelines, page 1-5
Configuring Normal-Range VLANs, page 1-6
Saving VLAN Configuration, page 1-7
Default Ethernet VLAN Configuration, page 1-7
Creating or Modifying an Ethernet VLAN, page 1-8
Deleting a VLAN, page 1-9
Assigning Static-Access Ports to a VLAN, page 1-9
Token Ring TrBRF VLANs
Token Ring TrCRF VLANs
Switches running the IP base or IP services feature set support 1005 VLANs in VTP client, server,
and transparent modes. Switches running the LAN base feature set support 255 VLANs.
Normal-range VLANs are identified with a number between 1 and 1001. VLAN numbers 1002
through 1005 are reserved for Token Ring and FDDI VLANs.
VLAN configuration for VLANs 1 to 1005 are always saved in the VLAN database. If the VTP mode
is transparent, VTP and VLAN configuration are also saved in the switch running configuration file.
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
Configuring Normal-Range VLANs
1-5
Advertisement
Table of Contents
Troubleshooting
