Bridge Protocol Data Unit Format And Processing - Cisco Catalyst 3560-X Software Configuration Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Command reference manual (1188 pages) ,
- Software configuration manual (1438 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Understanding RSTP
After ensuring that all of the ports are synchronized, the switch sends an agreement message to the
designated switch corresponding to its root port. When the switches connected by a point-to-point link
are in agreement about their port roles, the RSTP immediately transitions the port states to forwarding.
The sequence of events is shown in
Figure 1-5
8. Agreement
Bridge Protocol Data Unit Format and Processing
The RSTP BPDU format is the same as the IEEE 802.1D BPDU format except that the protocol version
is set to 2. A new 1-byte Version 1 Length field is set to zero, which means that no version 1 protocol
information is present.
Table 1-3
Bit
0
1
2–3:
4
5
6
7
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
1-12
Sequence of Events During Rapid Convergence
4. Agreement
5. Forward
2. Block
9. Forward
6. Proposal
Table 1-3
RSTP BPDU Flags
Function
Topology change (TC)
Proposal
Port role:
00
Unknown
01
Alternate port
10
Root port
11
Designated port
Learning
Forwarding
Agreement
Topology change acknowledgement (TCA)
Figure
1-5.
1. Proposal
Edge port
3. Block
11. Forward
7. Proposal
Root port
Designated port
shows the RSTP flag fields.
Chapter 1
Configuring MSTP
10. Agreement
OL-25303-03
Advertisement
Table of Contents
Troubleshooting
