Cisco Catalyst 3560-X Software Configuration Manual page 656
Hide thumbs
Also See for Catalyst 3560-X:
- Command reference manual (1188 pages) ,
- Software configuration manual (1438 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Understanding DHCP Features
Figure 1-1
(DHCP client)
When you enable the DHCP snooping information option 82 on the switch, this sequence of
events occurs:
The host (DHCP client) generates a DHCP request and broadcasts it on the network.
•
When the switch receives the DHCP request, it adds the option-82 information in the packet. By
•
default, the remote-ID suboption is the switch MAC address, and the circuit-ID suboption is the port
identifier, vlan-mod-port, from which the packet is received.You can configure the remote ID and
circuit ID. For information on configuring these suboptions, see the
Option 82" section on page
If the IP address of the relay agent is configured, the switch adds this IP address in the DHCP packet.
•
The switch forwards the DHCP request that includes the option-82 field to the DHCP server.
•
The DHCP server receives the packet. If the server is option-82-capable, it can use the remote ID,
•
the circuit ID, or both to assign IP addresses and implement policies, such as restricting the number
of IP addresses that can be assigned to a single remote ID or circuit ID. Then the DHCP server
echoes the option-82 field in the DHCP reply.
The DHCP server unicasts the reply to the switch if the request was relayed to the server by the
•
switch. The switch verifies that it originally inserted the option-82 data by inspecting the remote ID
and possibly the circuit ID fields. The switch removes the option-82 field and forwards the packet
to the switch port that connects to the DHCP client that sent the DHCP request.
In the default suboption configuration, when the described sequence of events occurs, the values in these
fields in
Circuit-ID suboption fields
•
–
–
–
–
Remote-ID suboption fields
•
–
–
–
–
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
1-4
DHCP Relay Agent in a Metropolitan Ethernet Network
Catalyst switch
(DHCP relay agent)
Subscribers
Host A
1-12.
Figure 1-2
do not change:
Suboption type
Length of the suboption type
Circuit-ID type
Length of the circuit-ID type
Suboption type
Length of the suboption type
Remote-ID type
Length of the remote-ID type
Chapter 1
DHCP
server
Access layer
VLAN 10
Host B
(DHCP client)
Configuring DHCP Features and IP Source Guard
"Enabling DHCP Snooping and
OL-25303-03
Advertisement
Table of Contents
Troubleshooting
