Idrac Settings Utility - Dell PowerEdge FC630 Owner's Manual

Hide thumbs Also See for PowerEdge FC630:

Getting started (2 pages)

Getting started with your system (2 pages)

Owner's manual (113 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

Table of Contents

Option

Description

F1/F2 Prompt on

Enables or disables the F1/F2 prompt on error. This option is set to Enabled by

Error

default. The F1/F2 prompt also includes keyboard errors.

Load Legacy

Enables you to determine whether the system BIOS loads the legacy video (INT

Video Option

10H) option ROM from the video controller. Selecting Enabled in the operating

ROM

system does not support UEFI video output standards. This field is available only for

UEFI boot mode. You cannot set the option to Enabled if UEFI Secure Boot mode

is enabled.

In-System

Enables or disables In-System Characterization. This option is set to Disabled by

Characterization

default. The two other options are Enabled and Enabled - No Reboot.

When enabled, In-System Characterization (ISC) executes during POST upon

detecting relevant change(s) in system configuration to optimize system power and

performance. ISC takes about 20 seconds to execute, and system reset is needed

for ISC results to be applied. The Enabled - No Reboot option executes ISC and

continues without applying ISC results until the next time system reset occurs. The

Enabled option executes ISC and forces an immediate system reset so that ISC

results can be applied. It takes the system longer to be ready due to the forced

system reset. When disabled, ISC does not execute.