Mitsubishi Electric FX3G SERIES Programming Manual page 320

Programmable controllers

Hide thumbs Also See for FX3G SERIES:

Table of Contents

Series Programmable Controllers

Programming Manual - Basic & Applied Instruction Edition

"K0" is written to the entire range from

Related instructions

1. RST instruction

As an independent reset instruction for devices, RST instruction can be used for bit devices (Y, M and S) and word

devices (T, C, D and R).

2. FMOV (FNC 16) instruction

FMOV (FNC 16) instruction is provided to write a constant (example: K0) at one time. By using this instruction, "0" can

be written to word devices (KnY, KnM, KnS, T, C, D and R) at one time.

1. Caution on specifying devices

Specify same type of devices in

device number of

If the device number of

are word devices

M0 is reset.

The current value of T0 is

D0 is reset.

is larger than the device number of

at one time.

are reset at one time.

K0 is written to D0 to D99 at one time.

. The device number of

, only one device specified in

12 Data Operation – FNC 40 to FNC 49

12.1 FNC 40 – ZRST / Zone Reset

should be smaller than or equal to the

Fx3u series Fx3uc series