Mitsubishi Electric FX3G SERIES Programming Manual page 627

Programmable controllers

Hide thumbs Also See for FX3G SERIES:

Table of Contents

Series Programmable Controllers

Programming Manual - Basic & Applied Instruction Edition

• When directly specifying a character string, up to 32 characters can be specified (input).

However, this limitation in the number of characters is not applied when a word device is specified in

• When the values in both

is stored in

An operation error is caused in the following cases; The error flag M8067 turns ON, and the error code is stored in

• When the number of devices after a device number specified by

required to store all linked character strings (that is, when "00H" cannot be stored after all character strings and the

last character) (error code: K6706)

• When the same device is specified in

code: K6706)

• When "00H" is not set within the corresponding device range after the device specified by

code: K6706)

Program example

In the program example shown below, a character string stored in D10 to D12 (abcde) is linked to the character string

"ABCD", and the result is stored to D100 and later when X000 turns ON.

62H(b) 61H(a)

64H(d) 63H(c)

start from "00H" (that is, when the number of characters is "0"), "0000H"

"00H" is automatically stored.

26 Character String Control – FNC200 to FNC209

26.3 FNC202 – $+ / Link Character Strings

is smaller than the number of devices

as a device for storing a character string (error

62H(b) 61H(a)

64H(d) 63H(c)

43H(C) 42H(B)

Fx3u series Fx3uc series