Mitsubishi Electric FX3G SERIES Programming Manual page 670

Programmable controllers

Hide thumbs Also See for FX3G SERIES:

Table of Contents

Series Programmable Controllers

Programming Manual - Basic & Applied Instruction Edition

Program examples

1. Program example 1

In the program example shown below, the BCD data set in X020 to X037 is controlled by the dead band from "-1000"

to "+1000", and a controlled value is output to D1 when X000 turns ON.

• In the case of "D0 < -1000", "D0 - (-1000)" is output to D1.

• In the case of "-1000 ≤ D0 ≤ +1000", "0" is output to D1.

• In the case of "D0 > +1000", "D0 - 1000" is output to D1.

2. Program example 2

In the program example shown below, the BCD data set in X020 to X057 is controlled by the dead band from "-10000"

to "+10000", and a controlled value is output to D11 and D10 when X000 turns ON.

• In the case of "(D1, D0) < -10000", "(D1, D0) - (-10000)" is output to

• In the case of "-10000 ≤ (D1, D0) ≤ +10000", "0" is output to (D11,

• In the case of "(D1, D0) > +10000", "(D1, D0) - 10000" is output to

K-10000 K10000

29 Data Table Operation – FNC250 to FNC269

29.2 FNC257 – BAND / Dead Band Control

Fx3u series Fx3uc series