Mitsubishi Electric FX3G SERIES Programming Manual page 312

Programmable controllers

Hide thumbs Also See for FX3G SERIES:

Table of Contents

Series Programmable Controllers

Programming Manual - Basic & Applied Instruction Edition

Overflow (data to

Note that "n2" words are shifted every time the drive input turns from OFF to ON in the WSFLP instruction, but that

"n2" words are shifted in each operation cycle in the WSFL instruction.

If the transfer source

Program example

1. Shifting devices with digit specification

Make sure that the number of digits is

equivalent (Kn

Y017 Y016 Y015 Y014 Y013 Y012 Y011 Y010 Y007 Y006 Y005 Y004 Y003 Y002 Y001Y000

is equivalent to the shifted device

K1X000 K1Y000

Specify the same digit for devices with digit specification.

11 Rotation and Shift Operation – FNC 30 to FNC 39

n1 (in the case of "n1=9")

"n2" bits are

shifted leftward

before shift (n2=3)

, an operation error occurs (error code: K6710).

X007 X006 X005 X004 X003 X002 X001 X000

11.8 FNC 37 – WSFL / Word Shift Left

n2 (in the case of "n2=3")

before shift (n2=3)

Fx3u series Fx3uc series