Mitsubishi Electric FX3G SERIES Programming Manual page 421

Programmable controllers

Hide thumbs Also See for FX3G SERIES:

Table of Contents

Series Programmable Controllers

Programming Manual - Basic & Applied Instruction Edition

• The data table configuration is explained in an example in which the sorting source data table has 3 lines and 4

columns (m1 = K3, m2 = K4). For the sorting result data table, understand

• When the command input turns ON, data sorting is started. Data sorting is completed after "m1" scans, and the

instruction execution complete flag M8029 is set to ON.

2. Operation examples

When the instruction is executed with "n = K2 (column No. 2)" and "n = K3 (column No. 3) for the following sorting

source data, the operations shown below are acquired.

It is recommended to put a serial number such as a control number in the first column so that the original line number

can be estimated based on the contents.

Sorting source data

Sorting result when the instruction is executed with "n = K2 (column No. 2)"

Control number

→ For the instruction execution complete flag use method, refer to Subsection 6.5.2.

Number of groups (m2 = K4)

Control number

Control number

14 Handy Instruction – FNC 60 to FNC 69

14.10 FNC 69 – SORT / SORT Tabulated Data

Number of groups (m2 = K4)

Fx3u series Fx3uc series