Mitsubishi Electric FX3G SERIES Programming Manual page 577

Programmable controllers

Hide thumbs Also See for FX3G SERIES:

Table of Contents

Series Programmable Controllers

Programming Manual - Basic & Applied Instruction Edition

2. 32-bit operation (DSTOH and DSTOHP)

The time data in units of "second" stored in

second", and stored to three devices

For example, when "45,325 seconds" is specified, the operation is as follows:

An operation error is caused in the following case; The error flag M8067 turns ON, and the error code is store in

• When the data of

Program example

In the program shown below, the time data in units of "second" stored in D0 and D1 is converted into data in units of

"hour, minute, and second", and stored to D100, D101, and D102 when X020 turns ON.

• Converting the data in second into the data in hour, minute and second using STOHP instruction

(when "40,000 seconds" is specified by D1 and D0)

(0 to 117964799)

is outside the allowable range (error code: K6706)

21 Real Time Clock Control – FNC160 to FNC169

21.6 FNC165 – STOH / Second to Hour Conversion

is converted into data in units of "hour, minute, and

+2 (hour, minute, and second).

(0 to 32767)

Fx3u series Fx3uc series