Table of Contents
Advertisement
Troubleshooting
Shielded
5
6
7
8
Management Ethernet Port Pinout
A single management copper ENET port supporting 10/100/1000Base-T operation exists on each RSP. There
is no direct access to the CPU of the other RSP. It uses a standard RJ45 jack.
This is not a data plane port.
Note
The table below summarizes the Management Ethernet port pinout.
Table 21: Management Ethernet Port Pinout
Pin
1
2
3
4
5
6
7
8
USB Console Port Pinout
Two individual Type-A USB connector are used for USB console and USB mass storage. One single USB
2.0 Type-A receptacle is provided on the RSP front panel for providing console access to ROMMON, IOS-XE
and diagnostics. It operates as a USB peripheral only for connection to an external host PC. This requires the
use of a Type-A to Type-A connector instead of a standard USB cable.
Unshielded
Transmit Tip
5
Transmit Shield
6
Not Used
7
Not Used
8
Signal Name
TRP0+
TRP0-
TRP1+
TRP1-
TRP2+
TRP2-
TRP3+
TRP3-
Management Ethernet Port Pinout
Transmit Tip
—
—
—
Description
Cisco ASR 907 Router Hardware Installation Guide
133
Advertisement
Table of Contents
