Table of Contents
Advertisement
Managing SCTs
Table 7-2
Table 7-2
Parameter
service_module_type
PORT|CARD
SCT_ID
V<major_version>
Creating and Modifying SCT Files
SCT files can be created and modified using CWM as described in the Cisco WAN Manager User's
Guide, Release 15. While there are no CLI commands for modifying SCT files, you can override SCT
file settings for specific connections using CLI commands such as cnfabr and cnfabrtparmdft. If you
need to modify multiple settings or multiple connections, it can be more efficient to modify SCTs with
CWM.
Downloading SCT Files to the Switch
When you want to download a new or modified SCT file, you can download the file using CWM or by
using an FTP program. If you have used CWM to create or modify an SCT or if you are using CWM to
manage your SCTs, it is best to use CWM to download and to register the file. For more information,
refer to the Cisco WAN Manager User's Guide, Release 15.
When using an FTP program, copy the files to the C:SCT/TEMP directory on the switch. For the latest
information on Cisco provided SCTs, refer to the following release note documents:
•
•
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
7-6
describes the parameters used in the SCT naming convention.
SCT Naming Conventions
Description
The type of the service module on which the SCT will be applied. The
possible service module types are AXSM, AXSME, AXSMXG, FRSM12,
MPSM155, and PXM1E.
Specifies whether this is a port SCT or a card SCT.
Note
This decimal number identifies an SCT and is the number used to select a
SCT when specifying a port or card SCT. The following SCT numbers
indicate additional information:
•
•
•
This decimal number identifies the major version of the SCT. The major
version of the SCT changes whenever a new object is added or deprecated
in the SCT MIB. Only Cisco can change the major version of an SCT.
A minor version change occurs when an SCT is modified using CWM.
Minor version numbers do not appear in the filename but they do appear
in CWM and in the CLI after the SCT is registered. To see the minor
version of registered SCTs, use the dspscts command.
Release Notes for Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, and Cisco MGX 8830
Switches, Release 5.0.00
Release Notes for the Cisco MGX 8880 Media Gateway, Release 5.0.00
PXM1E cards use port SCTs only. Card SCT s are not applicable
to PXM1E cards.
0 = Default SCT for the card type
1-99 = Cisco provided SCTs which may be modified with CWM
100 -255 = Custom SCTs created with CWM
Chapter 7
Managing Service Class Templates
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Advertisement
Table of Contents
Troubleshooting
