Cisco Asr 903 Aggregation Services Router Hardware Installation Guide - Cisco ASR 903 Hardware Installation Manual
Hide thumbs
Also See for ASR 903:
- Release notes (280 pages) ,
- Installation manual (200 pages) ,
- Manual (147 pages)
Table of Contents
Advertisement
Preparing for Installation
This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation.
Caution
Install only in accordance with national and local wiring regulations.
The Cisco ASR 903 Router installation must comply with all the applicable codes and is approved for use
Note
with copper conductors only. The ground bond fastening hardware should be of compatible material and
preclude loosening, deterioration, and electrochemical corrosion of hardware and joined material.
Attachment of the chassis ground to a central office or other interior ground system must be made with a
6 AWG gauge wire, copper ground conductor at a minimum.
The maximum power draw of the Cisco ASR 903 Router chassis and its configurable hardware components
are listed in the following table. The maximum power draw values are not affected by whether the router
chassis contains 1 or 2 power supplies AC or DC.
Hardware component(s)
Router chassis with 2 power supplies, 1 fan tray, and
1 RSP1A
Router chassis with 2 power supplies, 1 fan tray, and
1 RSP1B
A900-RSP1A-55 (standby)
A900-RSP1B-55 (standby)
A900-RSP2A-64 (active)
A900-RSP2A-64 (standby)
A900-RSP2A-128 (active)
A900-RSP2A-128 (standby)
A900-RSP3-400-S (active)
A900-RSP3-400-S (standby)
A900-RSP3-200-S (active)
A900-RSP3-200-S (standby)
A900-IMA1X (1-port 10 GE XFP interface module)
A900-IMA8T (8-port 1 GE RJ45 interface module)
A900-IMA8S (8-port 1 GE SFP interface module)
A900-IMA8D (8-port T1/E1 interface module)
Maximum power draw value
195 W
210 W
100 W
100 W
70 W
55 W
100 W
85 W
230 W
230 W
160 W
160 W
13.0 W
17.5 W
17.5 W
14.5 W
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
Site Power Guidelines
67
Advertisement
Table of Contents
