Displaying An Active External Work Offset; Display The Sum Of The Active Work Offsets - Siemens SINUMERIK 840Di sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
5
01/2008
5.6.6 Displaying an active external work offset
Work
Go to...
offset
External
WO
5.6.7 Display the sum of the active work offsets
Work
Go to...
offset
Sum of
WO
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
The active, external work offsets can be displayed.
Values cannot be edited in this display.
Sequence of operations
Press the "Work offset" and "Go to ..." softkeys.
The vertical softkey bar changes.
The "External WO" window is opened.
Function
The sum of the active work offsets from the part program can be
displayed.
Values cannot be edited in this display.
Sequence of operations
Press the "Work offset" and "Go to ..." softkeys.
The vertical softkey bar changes.
The "Sum of WO" window is opened.
The sum of work offsets is calculated in the following way:
Sum WO = active settable WO + active programmable WO
The values can be edited only in the "Settable work offsets" menu.
(see Section "Settable work offsets" menu)
Parameters operating area
5.6
Zero/work offset
5
5-237
Advertisement
Table of Contents
