Graphically Displaying The Contour - Siemens SINUMERIK 840Di sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
6
"Program" operating area
6.7
Free contour programming
6.7.4 Graphically displaying the contour
6-298
Function
The graphics window displays the progress of the contour chain as
you configure the parameters for the contour elements. The element
you have selected is displayed in red in the graphics window.
Navigation within the contour is described in "Program contour".
The created contour element can be displayed in various line types
and colors depending on its status:
Color/line
Black
Red
Green
Black continuous line
Black dashed line
with a black arrow
Light blue line
The contour is displayed to the extent it can be interpreted by the
control on the basis of parameter inputs. If the contour is still not
displayed in the programming graphic, further values must be entered.
Check the contour elements you have already programmed, if
required. You may have forgotten to enter all of the known data. The
coordinate system scaling is automatically adapted to changes in the
complete contour.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
01/2008
Significance
Programmed contour
Current contour element
Alternative element
Element is fully defined
Selected element
Element is partially defined
© S iemens AG 2008 All rights reserved.
6
Advertisement
Table of Contents
