Configuring The Context To Network Entity Mapping - Cisco Nexus 9000 Series Configuration Manual
Nx-os system management configuration
guide, release 6.x
Hide thumbs
Also See for Nexus 9000 Series:
- Configuration manual (562 pages) ,
- Troubleshooting manual (126 pages) ,
- Quick start configuration manual (6 pages)
Table of Contents
Advertisement
Configuring the Context to Network Entity Mapping
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Configuring the Context to Network Entity Mapping
You can configure an SNMP context to map to a logical network entity, such as a protocol instance or VRF.
Before You Begin
Determine the logical network entity instance. For more information on VRFs and protocol instances, see the
Cisco Nexus 9000 Series NX-OS Unicast Routing Configuration Guide or the Cisco Nexus 9000 Series NX-OS
Multicast Routing Configuration Guide.
Procedure
Step 1
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
134
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
snmp-server contact name
Example:
switch(config)# snmp-server contact Admin
snmp-server location name
Example:
switch(config)# snmp-server location
Lab-7
show snmp
Example:
switch(config)# show snmp
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
Purpose
Enters global configuration mode.
Configures sysContact, which is the SNMP
contact name.
Configures sysLocation, which is the SNMP
location.
(Optional)
Displays information about one or more
destination profiles.
(Optional)
Copies the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Configuring SNMP
Advertisement
Table of Contents
