Ip Igmp Filter - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
ip igmp filter
ip igmp filter
Use the ip igmp filter interface configuration command to control whether or not all hosts on a Layer 2
interface can join one or more IP multicast groups by applying an Internet Group Management Protocol
(IGMP) profile to the interface. Use the no form of this command to remove the specified profile from
the interface.
Syntax Description
profile number
Defaults
No IGMP filters are applied.
Command Modes
Interface configuration
Command History
Release
12.2(25)FX
Usage Guidelines
You can apply IGMP filters only to Layer 2 physical interfaces; you cannot apply IGMP filters to ports
that belong to an EtherChannel group.
An IGMP profile can be applied to one or more switch port interfaces, but one port can have only one
profile applied to it.
Examples
This example shows how to apply IGMP profile 22 to a port:
Switch(config)# interface gigabitethernet0/2
Switch(config-if)# ip igmp filter 22
You can verify your setting by using the show running-config privileged EXEC command and by
specifying an interface.
Related Commands
Command
ip igmp profile
show ip igmp profile
show running-config interface
interface-id
Catalyst 2960 Switch Command Reference
2-108
ip igmp filter profile number
no ip igmp filter
The IGMP profile number to be applied. The range is 1 to 4294967295.
Modification
This command was introduced.
Chapter 2
Description
Configures the specified IGMP profile number.
Displays the characteristics of the specified IGMP profile.
Displays the running configuration on the switch interface, including
the IGMP profile (if any) that is applied to an interface. For syntax
information, select Cisco IOS Configuration Fundamentals
Command Reference, Release 12.2 > File Management Commands
> Configuration File Management Commands.
Catalyst 2960 Switch Cisco IOS Commands
78-16882-01
Hide quick links:
Advertisement
Table of Contents
