Renew Ip Dhcp Snooping Database - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 2960 Switch Cisco IOS Commands
renew ip dhcp snooping database
Use the renew ip dhcp snooping database privileged EXEC command to renew the DHCP snooping
binding database.
Syntax Description
flash:/filename
ftp://user:password
@host/filename
nvram:/filename
rcp://user@host/file
name
tftp://host/filename
validation none
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
If you do not specify a URL, the switch tries to read the file from the configured URL.
Examples
This example shows how to renew the DHCP snooping binding database without checking CRC values
in the file:
Switch# renew ip dhcp snooping database validation none
You can verify your settings by entering the show ip dhcp snooping database privileged EXEC
command.
78-16882-01
renew ip dhcp snooping database [{flash:/filename | ftp://user:password@host/filename |
nvram:/filename | rcp://user@host/filename | tftp://host/filename}] [validation none]
(Optional) Specify that the database agent or the binding file is in the flash
memory.
(Optional) Specify that the database agent or the binding file is on an FTP
server.
(Optional) Specify that the database agent or the binding file is in the NVRAM.
(Optional) Specify that the database agent or the binding file is on a Remote
Control Protocol (RCP) server.
(Optional) Specify that the database agent or the binding file is on a TFTP
server.
(Optional) Specify that the switch does not verify the cyclic redundancy check
(CRC) for the entries in the binding file specified by the URL.
Modification
This command was introduced.
renew ip dhcp snooping database
Catalyst 2960 Switch Command Reference
2-233
Hide quick links:
Advertisement
Table of Contents
