Cisco Catalyst 2960 Command Reference Manual page 322
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
show etherchannel
Examples
This is an example of output from the show etherchannel 1 detail command:
Switch> show etherchannel 1 detail
Group state = L2
Ports: 2
Port-channels: 1 Max Port-channels = 16
Protocol:
Port: Gi0/1
------------
Port state
Channel group = 1
Port-channel
Port index
Flags:
Local information:
Port
Gi0/1
Age of the port in the current state: 01d:20h:06m:04s
Port-channel: Po1
------------
Age of the Port-channel
Logical slot/port
HotStandBy port = null
Port state
Protocol
Ports in the Port-channel:
Index
------+------+------+------------------+-----------
0
0
Time since last port bundled:
This is an example of output from the show etherchannel 1 summary command:
Switch> show etherchannel 1 summary
Flags:
Catalyst 2960 Switch Command Reference
2-294
Maxports = 16
LACP
Ports in the group:
-------------------
= Up Mstr In-Bndl
Mode = Active
= Po1
GC
= 0
Load = 0x00
S - Device is sending Slow LACPDUs
A - Device is in active mode.
LACP port
Flags
State
Priority
SA
bndl
32768
Port-channels in the group:
----------------------
(Primary Aggregator)
= 01d:20h:20m:26s
= 10/1
= Port-channel Ag-Inuse
=
LACP
Load
Port
EC state
00
Gi0/1
Active
00
Gi0/2
Active
D - down
P - in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3
S - Layer2
u - unsuitable for bundling
U - in use
f - failed to allocate aggregator
d - default port
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Gcchange = -
=
-
Pseudo port-channel = Po1
Protocol =
F - Device is sending fast LACPDU
P - Device is in passive mode.
Admin
Oper
Key
Key
0x0
0x1
Number of ports = 2
No of bits
0
0
01d:20h:20m:20s
Gi0/2
LACP
Port
Port
Number
State
0x0
0x3D
78-16882-01
Hide quick links:
Advertisement
Table of Contents
