Mkdir - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Boot Loader Commands

mkdir

Use the mkdir boot loader command to create one or more new directories on the specified file system.

Syntax Description

/directory-url

Command Modes

Command History

Usage Guidelines

Directory names are case sensitive.

Directory names are limited to 45 characters between the slashes (/); the name cannot contain control

characters, spaces, deletes, slashes, quotes, semicolons, or colons.

This example shows how to make a directory called Saved_Configs:

switch: mkdir flash:Saved_Configs

Directory "flash:Saved_Configs" created

This example shows how to make two directories:

switch: mkdir flash:Saved_Configs1 flash:Test

Directory "flash:Saved_Configs1" created

Directory "flash:Test" created

You can verify that the directory was created by entering the dir filesystem: boot loader command.

Related Commands

mkdir filesystem:/directory-url ...

Alias for a flash file system. Use flash: for the system board flash device.

Name of the directories to create. Separate each directory name with a space.

Modification

This command was introduced.

Displays a list of files and directories on the specified file system.

Removes one or more directories from the specified file system.

Catalyst 2960 Switch Command Reference

Show Quick Links

Table of Contents