Connection Devices (Rj45 Connector And Distributor) - Mitsubishi Electric FX5 User Manual
Melsec iq-f series
Hide thumbs
Also See for FX5:
- Programming manual (1112 pages) ,
- User manual (958 pages) ,
- Reference manual (44 pages)
Table of Contents
Advertisement
When using a wire ferrule with insulation sleeve
Because it is difficult to insert a cable into an insulating sleeve depending on the thickness of the cable sheath, select the
proper cable according to the outline drawing.
FX5U CPU module built-in RS-485 port
Insulating sleeve
2 to 2.5 mm
(0.07" to 0.09")
10.5 to 12 mm
(0.41" to 0.47")
<Reference>
FX5U CPU module built-in RS-485 port
FX5UC CPU module built-in RS-485 port
FX5-485-BD
FX5-485ADP
Tool
For tightening the terminal, use a commercially available small screwdriver with
straight tip that is not widened toward the end as shown below.
Precautions
If the diameter of the screwdriver tip is too small, the required tightening torque
cannot be achieved. To achieve the appropriate tightening torque shown in the
previous page, use the following screwdriver or its equivalent (grip diameter:
approximately 25 mm (0.98")).
<Reference>
Manufacturer
Phoenix Contact
Connection devices (RJ45 connector and distributor)
Prepare the following devices if necessary.
Product name
RJ45 connector
Distributor
4 INVERTER COMMUNICATION
82
4.5 Wiring
Contact area
(crimp area)
6 mm
(0.23")
Manufacturer
Phoenix Contact
Model name
5-554720-3
BMJ-8
BMJ-8-28N (no internal connection for pins 2 and 8)
(Do not use plug with termination resistor.)
FX5UC CPU module built-in RS-485 port, FX5-485-BD,
FX5-485ADP
Contact area
Insulating sleeve
(crimp area)
8 mm
(0.31")
2.6 mm
(0.1")
14 mm
(0.55")
Model name
AI 0.5-6WH
AI 0.5-8WH
0.4 mm
(0.01")
Model name
SZS 0.42.5
Manufacturer
Tyco Electronics Japan, Ltd.
HACHIKO ELECTRIC CO., LTD
Crimping tool
CRIMPFOX 6
CRIMPFOX 6T-F
With straight tip
2.5 mm
(0.09")
Advertisement
Table of Contents
Troubleshooting
