Mitsubishi Electric FX5 User Manual page 425
Melsec iq-f series
Hide thumbs
Also See for FX5:
- Programming manual (1112 pages) ,
- User manual (958 pages) ,
- Reference manual (44 pages)
Table of Contents
Advertisement
Error
Error name
Error details and cause
code
365CH
Axis 12 error stop
• When pulses were being output or
(deceleration
positioning was starting, the PLC
stop)
decelerated and stopped the pulse
output due to the limit of the moving
direction or writing during RUN. (The
PLSY/DPLSY instruction stops pulse
output immediately at both limits.)
• When pulses were being output or
positioning was starting, the PLC
decelerated and stopped the pulse
output by the pulse decelerate and stop
command.
• When pulses were being output, the
command speed was changed to 0.
• When pulses were being output,
RUN→PAUSE/RUN→STOP operation
was executed.
3661H
Axis 1 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
3662H
Axis 2 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
3663H
Axis 3 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
3664H
Axis 4 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
3665H
Axis 5 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
3666H
Axis 6 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
3667H
Axis 7 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
3668H
Axis 8 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
3669H
Axis 9 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
366AH
Axis 10 error stop
• When pulses were being output or
(immediately
positioning was rising, the PLC stopped
stop)
the pulse output immediately by the
pulse stop command or detection of the
all outputs disable flag.
Action
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
• Eliminate the error that has caused the stop
and restart the positioning.
Detailed
Diagnostic
information
timing
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
Error location
At END
information
instruction
and system
execution, at
configuration
instruction
information
execution
APPX
423
Appendix 3 Error Code
A
Advertisement
Table of Contents
Related Manuals for Mitsubishi Electric FX5
Related Products for Mitsubishi Electric FX5
- Mitsubishi Electric MELSEC iQ-F FX5U
- Mitsubishi Electric MELSEC iQ-F FX55-ASL-M
- Mitsubishi Electric MELSEC iQ-F FX5UC-96MT/D
- Mitsubishi Electric MELSEC iQ-F FX5UC-64MT/DSS
- Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/D
- Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/DSS
- Mitsubishi Electric MELSEC iQ-F FX5UC-96MT/DSS
- Mitsubishi Electric MELSEC iQ-F FX5UC-64MT/D
- Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/DS-TS
- Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/DSS-TS
- Mitsubishi Electric FX5-ENET
- Mitsubishi Electric FX5-DP-M
- Mitsubishi Electric MELSEC iQ-F FX5UC Series
- Mitsubishi Electric Melsec iQ-F FX5-C32EYT Series
- Mitsubishi Electric Melsec iQ-F FX5-C32ET TS Series
- Mitsubishi Electric Melsec iQ-F FX5-C16EYR/D-TS