Mitsubishi Electric FX5 User Manual page 439
Melsec iq-f series
Hide thumbs
Also See for FX5:
- Programming manual (1112 pages) ,
- User manual (958 pages) ,
- Reference manual (44 pages)
Table of Contents
Advertisement
Error
Error name
Error details and cause
code
4C11H
CPU function
• An SD memory card is not inserted.
dedicated error
• An SD memory card is disabled by SM606 (SD memory
card forced disable instruction).
4C12H
CPU function
• Reading/writing of data from/to an SD memory card
dedicated error
completed with an error.
4C13H
CPU function
• Reading/writing of data from/to the CPU built-in memory
dedicated error
completed with an error.
• The backup target files opened in the CPU built-in memory
are duplicated.
4C14H
CPU function
• The CPU module data backup/restoration function cannot
dedicated error
be executed because a file password is set to the data.
• Data was restored to the CPU module where the same data
with a file password has already been stored.
4C15H
CPU function
• The function that cannot be executed simultaneously with
dedicated error
such as the file transfer function (FTP) is being executed.
4C17H
CPU function
• The backed up CPU module and restoration target
dedicated error
destination CPU module models were different when
restoration was executed.
4C18H
CPU function
• Data was restored while the operating status of the CPU
dedicated error
module is in RUN or PAUSE.
4C19H
CPU function
• The data restoration function was executed with backup
dedicated error
files ($BKUP_CPU_INF.BSC and BKUP_CPU.BKD) not
structured properly.
• Data (file(s)) is missing in the backup file
($BKUP_CPU_INF.BSC) in the backup data folder.
• The data restoration function was executed with a folder
where no backup files ($BKUP_CPU_INF.BSC,
BKUP_CPU.BKD, and BKUP_CPU_DEVLAB.BKD) are
stored.
4C1AH
CPU function
• A value outside the allowable range was set to to the
dedicated error
operation mode.
• An out-of-range value was set for the CPU module auto
exchange function restoration target data setting (SD9351).
• A folder with a value that matches the restoration target
date folder setting value or number folder setting value does
not exist in the SD memory card.
• The restoration target data setting value is out of range.
• The restoration target date folder setting value or number
folder setting value is out of range.
4C1BH
CPU function
• The data restoration function was executed to the CPU
dedicated error
module whose status (such as programs, parameters, and
file structure) differs from that of when the data backup
function was executed.
4C1CH
CPU function
• An SD memory card is not inserted.
dedicated error
• The SD memory card is disabled by SM606 (SD memory
card forced disable instruction).
• The SD memory card is write-protected.
4C20H
CPU function
• The data backup/restoration function was executed while
dedicated error
the CPU module is in a state where this function cannot be
executed.
Action
• Insert or re-insert an SD memory card, and execute the
function again.
• Enable the SD memory card operation, and execute the
function again.
• Check that an SD memory card is inserted, and execute the
function again.
• Replace the SD memory card, and execute the function
again.
• The backup data may have been corrupted. Execute the
data restoration function using another backup data.
• Back up data in the CPU built-in memory, initialize the
memory, and write the data back to the original memory.
Then, execute the data backup/restoration function.
• The possible cause is a hardware failure of the restoration
target CPU module. Execute the data restoration function to
another CPU module.
• Execute the function again after a while.
• Delete file passwords, and execute the CPU module data
backup/restoration function.
• Execute the function again after a while.
• Execute restoration again with the same CPU module
model as the backed up CPU module.
• Change the operating status of the CPU module to STOP,
and execute the function again.
• The backup data may have been corrupted. Execute the
data restoration function using another backup data.
• Check the operation mode setting value, and execute again.
• Review the CPU module auto exchange function restoration
target data setting value, and execute again.
• Check and correct the restoration target date folder setting
value or number folder setting value, and execute the
function again.
• Check and correct the restoration target data setting value,
and execute the function again.
• Match the CPU module status to the one at the time of
backup, and execute the function again.
• Insert or re-insert an SD memory card, and execute the
function again.
• Enable the SD memory card operation, and execute the
function again.
• Cancel the write protection, and execute the function again.
• Initialize the CPU built-in memory, and execute the data
restoration function again.
Appendix 3 Error Code
A
APPX
437
Advertisement
Table of Contents
Related Manuals for Mitsubishi Electric FX5
Related Products for Mitsubishi Electric FX5
- Mitsubishi Electric MELSEC iQ-F FX5U
- Mitsubishi Electric MELSEC iQ-F FX55-ASL-M
- Mitsubishi Electric MELSEC iQ-F FX5UC-96MT/D
- Mitsubishi Electric MELSEC iQ-F FX5UC-64MT/DSS
- Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/D
- Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/DSS
- Mitsubishi Electric MELSEC iQ-F FX5UC-96MT/DSS
- Mitsubishi Electric MELSEC iQ-F FX5UC-64MT/D
- Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/DS-TS
- Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/DSS-TS
- Mitsubishi Electric FX5-ENET
- Mitsubishi Electric FX5-DP-M
- Mitsubishi Electric MELSEC iQ-F FX5UC Series
- Mitsubishi Electric Melsec iQ-F FX5-C32EYT Series
- Mitsubishi Electric Melsec iQ-F FX5-C32ET TS Series
- Mitsubishi Electric Melsec iQ-F FX5-C16EYR/D-TS