Web Element Management System - Cisco ASR 5000 series Product Overview
Hide thumbs
Also See for ASR 5000 series:
- Administration manual (509 pages) ,
- Installation manual (317 pages) ,
- Thresholding configuration manual (163 pages)
Table of Contents
Advertisement
▀ Features and Functionality - Licensed Enhanced Feature Software
destruction of the chassis, cannot be protected by this scheme. In such cases, the MME Inter-Chassis Session Recovery
feature provides geographic redundancy between sites. This has the benefit of not only providing enhanced subscriber
experience even during catastrophic outages, but can also protect other systems such as the RAN from subscriber re-
activation storms.
The Interchassis Session Recovery feature allows for continuous call processing without interrupting subscriber
services. This is accomplished through the use of redundant chassis. The chassis are configured as primary and backup
with one being active and one in recovery mode. A checkpoint duration timer is used to control when subscriber data is
sent from the active chassis to the inactive chassis. If the active chassis handling the call traffic goes out of service, the
inactive chassis transitions to the active state and continues processing the call traffic without interrupting the subscriber
session. The chassis determines which is active through a propriety TCP-based connection called a redundancy link.
This link is used to exchange Hello messages between the primary and backup chassis and must be maintained for
proper system operation.
Interchassis Communication
Chassis configured to support Interchassis Session Recovery communicate using periodic Hello messages.
These messages are sent by each chassis to notify the peer of its current state. The Hello message contains
information about the chassis such as its configuration and priority. A dead interval is used to set a time limit
for a Hello message to be received from the chassis' peer. If the standby chassis does not receive a Hello
message from the active chassis within the dead interval, the standby chassis transitions to the active state. In
situations where the redundancy link goes out of service, a priority scheme is used to determine which chassis
processes the session. The following priority scheme is used:
Checkpoint Messages
Checkpoint messages are sent from the active chassis to the inactive chassis. Checkpoint messages are sent at
specific intervals and contain all the information needed to recreate the sessions on the standby chassis, if that
chassis were to become active. Once a session exceeds the checkpoint duration, checkpoint data is collected on
the session. The checkpoint parameter determines the amount of time a session must be active before it is
included in the checkpoint message.
Important:
chapter in System Enhanced Feature Configuration Guide.
Web Element Management System
Provides a graphical user interface (GUI) for performing fault, configuration, accounting, performance, and security
(FCAPS) management.
The Web Element Manager is a Common Object Request Broker Architecture (CORBA)-based application that
provides complete fault, configuration, accounting, performance, and security (FCAPS) management capability for the
system.
For maximum flexibility and scalability, the Web Element Manager application implements a client-server architecture.
This architecture allows remote clients with Java-enabled web browsers to manage one or more systems via the server
▄ Cisco ASR 5000 Series Product Overview
router identifier
chassis priority
SPIO MAC address
For more information on inter-chassis session recovery support, refer Interchassis Session Recovery
Mobility Management Entity Overview
OL-22938-02
Advertisement
Table of Contents
