Table of Contents
Advertisement
Configuring iSCSI TLV
Step 11
Step 12
Step 13
Step 14
Step 15
This example shows how to configure a no-drop policy map.
switch# configure terminal
switch(config)# class-map type network-qos c1
switch(config-cmap-nq)# match qos-group 2
switch(config-cmap-nq)# exit
switch(config)# class-map type network-qos class-fcoe
switch(config-cmap-nq)# match qos-group 1
switch(config-cmap-nq)# exit
switch(config)# policy-map type network-qos p1
switch(config-pmap-nq)# class type network-qos c1
switch(config-pmap-c-nq)# pause no-drop
switch(config-pmap-nq)# class type network-qos class-fcoe
switch(config-pmap-c-nq)# mtu 2158
switch(config-pmap-c-nq)# pause no-drop
switch(config-pmap-nq)# class type network-qos class-default
switch(config-pmap-c-nq)# mtu 9216
OL-30895-01
Command or Action
switch(config-pmap-nq)# class
type network-qos class-name
switch(config-pmap-c-nq)#
mtu 2158
switch(config-pmap-c-nq)#
pause no-drop [pfc-cos
pfc-cos-value]
switch(config-pmap-nq)# class
type network-qos class-name
switch(config-pmap-c-nq)#
mtu 9216
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Purpose
Associates a class map with the policy map, and enters
configuration mode for the specified system class.
The associated class map must be the same type as the
Note
policy map type.
Sets the MTU to 2158 bytes in the policy map for class-fcoe.
Configures a no-drop class. If you do not specify this command,
the default policy is drop.
The operation for the drop policy is a simple tail drop,
Note
where arriving packets will be dropped if the queue
increases to its allocated size.
The pfc-cos-value range is from 0 to 7. This option is
supported only for a ACL-based system class (which
filters traffic using criteria other than cos-based
matches).
The list of CoS values can potentially include
Caution
the CoS value that is used for FCoE traffic
in class-fcoe. You must determine if this is
desired behavior for your topology.
Associates the default system class (class-default) with the policy
map, and enters configuration mode for the specified system
class.
Note
The associated class map must be the same type as the
policy map type.
Enables the jumbo MTU for the whole switch by setting the MTU
to its maximum size (9216 bytes) in the policy map for the default
system class (class-default).
Configuring No-Drop Policy Maps
211
Advertisement
Table of Contents
