hit counter script

Device Settings; [Device 1] Tab - Sony HVO-4000MT Instructions For Use Manual

4k3d
Hide thumbs Also See for HVO-4000MT:
Table of Contents

Advertisement

Tip
For details on the content management system, contact
your local Sony representative.

Device Settings

Configure settings for external devices.
1
Select [Device Settings] in the [System Admin
Settings] screen, and press the ENTER button.
The [Device] screen appears.
2
Select a tab, and press the ENTER button.
3
Configure the settings in each tab as necessary.
For details on each tab, see the following.
[Device 1] Tab (page 62)
[Device 2] Tab (page 64)
[Control] Tab (page 64)
4
When you finish configuration, select [Apply] and
press the ENTER button.
The configurations are saved, and the [System Admin
Settings] screen appears again.

[Device 1] Tab

Configure settings for the USB devices connected to the
unit.
For details on devices that can be connected to the unit,
contact your local Sony representative.
[USB 3] to [USB 6]
Select the devices connected to USB ports 3 to 6 on the
rear panel of the unit.
The available settings include devices that are compatible
with the unit.
The default setting is [No Device].
If you select a printer, be sure to configure the [Printer
Settings].
For details on this setting, see "To configure printer
settings" (page 63).
Tips
• The unit can recognize the Sony UP-DR80MD printer
automatically. To have the unit recognize UP-
DR80MD printers automatically, set the USB port to
which the printer will be connected to [No Device] in
the device settings. Be aware that the printer will not be
recognized automatically while recording or playback
62

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvo-3300mt

Table of Contents