Show Qos - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
Chapter 22
Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show qos
To display the current QoS settings along with a the number of frames marked high priority, use the show
qos command.
Syntax Description
class-map
name class-name
dwrr
policy-map
name policy-name
service policy
interface fc
slot/port
vsan vsan-id
statistics
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
1.3(1)
Usage Guidelines
To access all but the statistics option for this command, you must perform the qos enable command.
Examples
The following example displays the contents of all class maps.
switch# show qos class-map
qos class-map MyClass match-any
qos class-map Class2 match-all
qos class-map Class3 match-all
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show qos {class-map [name class-name] | dwrr | policy-map [name policy-name] | service policy
[interface fc slot/port | vsan vsan-id] | statistics}
Displays QoS class maps.
Specifies a class map name. The maximum length is 63 alpha-numeric
characters.
Displays deficit weighted round robin queue weights.
Displays QoS policy-maps.
Specifies a policy map name. The maximum length is 63 alpha-numeric
characters.
Displays QoS service policy associations.
Specifies a Fibre Channel interface.
Specifies a VSAN ID. The range is 1 to 4093.
Displays QoS related statistics.
Modification
This command was introduced.
match dest-wwn 20:01:00:05:30:00:28:df
match src-wwn 23:15:00:05:30:00:2a:1f
match src-intf fc2/1
match src-intf fc2/14
match src-wwn 20:01:00:05:30:00:2a:1f
Cisco MDS 9000 Family Command Reference
show qos
22-269
Advertisement
Table of Contents
