Ip Access-List Extended Autoqos-4.0-Acl-Transactional-Data Permit Tcp Any Any Eq - Cisco Catalyst 4500 Series Configuration Manual
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
auto qos voip cisco-softphone
To generate QoS configuration for interfaces connected to PCs running the Cisco IP SoftPhone
application and mark police traffic coming from such interfaces, use the auto qos voip interface
configuration command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes
Interface configuration mode
Command History
Release
15.1(1)SG,
15.1(1)SG IOS-XE 3.3.0
Usage Guidelines
Ports configured with auto qos voip command are considered untrusted.
Global Level Commands Generated
After auto-QoS srnd4 commands are applied to an interface, they generate one or more of the following
templates (A, B, and C) at the global configuration level. Typically, a command generates a series of
class-maps that either match on ACLs or on DSCP (or CoS) values to differentiate traffic into application
classes. An input policy is also generated, whch matches the generated classes, sets qos-groups on the
classes, and in some cases, polices the classes to a set bandwidth. (A qos-group is a numerical tag that
allows different application classes to be treated as one unit. Outside the switch's context, it has no
significance.) Furthermore, eight egress-queue class-maps are generated, matching the qos-groups set in
the input policy. The actual egress output policy assigns a queue to each of these eight class-maps.
The commands generate templates only as needed. For example, on first use of a new commnand, global
configurations that define the eight queue egress service-policy are generated. Subsequently, auto-QoS
applied to other interfaces do not generate templates for egress queuing. This is because all auto-QoS
commands rely on the same eight queue models after migration, already been generated from the first
use of the new command.
The global template is defined by A, B, and C.
A. Template for ACLs and application classes used by the auto qos voip cisco-softphone command
ip access-list extended AutoQos-4.0-ACL-Multimedia-Conf
auto qos voip cisco-softphone
permit udp any any range 16384 32767
ip access-list extended AutoQos-4.0-ACL-Signaling
permit tcp any any range 2000 2002
permit tcp any any range 5060 5061
permit udp any any range 5060 5061
ip access-list extended AutoQos-4.0-ACL-Transactional-Data
permit tcp any any eq 443
permit tcp any any eq 1521
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Modification
This command was introduced on the Catalyst 4500 series switch.
auto qos voip cisco-softphone
2-67
Advertisement
Table of Contents
