Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
SUMMARY STEPS
1. enable
2. configure terminal
3. spanning-tree mode {pvst | mst | rapid-pvst}
4. interface interface-id
5. spanning-tree link-type point-to-point
6. end
7. clear spanning-tree detected-protocols
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3
spanning-tree mode {pvst | mst | rapid-pvst}
Example:
Switch(config)# spanning-tree mode pvst
Step 4
interface interface-id
Example:
Switch(config)# interface
GigabitEthernet1/0/1
Step 5
spanning-tree link-type point-to-point
Example:
Switch(config-if)# spanning-tree
link-type point-to-point
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Enters the global configuration mode.
Configures a spanning-tree mode. All stack members run the same
version of spanning tree.
• Select pvst to enable PVST+.
• Select mst to enable MSTP.
• Select rapid-pvst to enable rapid PVST+.
Specifies an interface to configure, and enters interface configuration
mode. Valid interfaces include physical ports, VLANs, and port
channels. The VLAN ID range is 1 to 4094. The port-channel range is
1 to 48.
Specifies that the link type for this port is point-to-point.
If you connect this port (local port) to a remote port through a
point-to-point link and the local port becomes a designated port, the
switch negotiates with the remote port and rapidly changes the local
port to the forwarding state.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Spanning-Tree Features
225
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
