Cisco Catalyst 3750 Software Configuration Manual page 860
Metro switch
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Hardware installation manual (231 pages) ,
- Message manual (120 pages)
Table of Contents
Advertisement
Working with Software Images
•
•
Downloading an Image File By Using TFTP
You can download a new image file and replace the current image or keep the current image.
Beginning in privileged EXEC mode, follow Steps 1 through 3 to download a new image from a TFTP
server and overwrite the existing image. To keep the current image, skip Step 3.
Command
Step 1
Step 2
Step 3
archive download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name.tar
Step 4
archive download-sw /leave-old-sw /reload
tftp:[[//location]/directory]/image-name.tar
The download algorithm verifies that the image is appropriate for the switch model and that enough
DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the
download algorithm removes the existing image on the flash device whether or not it is the same as the
new one, downloads the new image, and then reloads the software.
Catalyst 3750 Metro Switch Software Configuration Guide
B-22
Appendix B
Before uploading the image file, you might need to create an empty file on the TFTP server. To
create an empty file, enter the touch filename command, where filename is the name of the file you
will use when uploading the image to the server.
During upload operations, if you are overwriting an existing file (including an empty file, if you had
to create one) on the server, ensure that the permissions on the file are set correctly. Permissions on
the file should be world-write.
Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Copy the image to the appropriate TFTP directory on the
workstation. Make sure the TFTP server is properly configured; see
the
"Preparing to Download or Upload an Image File By Using
TFTP" section on page
B-21.
Log into the switch through the console port or a Telnet session.
Download the image file from the TFTP server to the switch, and
overwrite the current image.
The /overwrite option overwrites the software image in flash
•
memory with the downloaded image.
The /reload option reloads the system after downloading the
•
image unless the configuration has been changed and not been
saved.
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and image
names are case sensitive.
Download the image file from the TFTP server to the switch, and
keep the current image.
The /leave-old-sw option keeps the old software version after
•
a download.
The /reload option reloads the system after downloading the
•
image unless the configuration has been changed and not been
saved.
•
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name.tar, specify the directory
(optional) and the image to download. Directory and image
names are case sensitive.
78-15870-01
Advertisement
Table of Contents
Troubleshooting
