Finding Feature Information; Prerequisites For Configuring Ssm - Cisco Catalyst 3850 series Configuration Manual
Ip multicast routing configuration guide
Hide thumbs
Also See for Catalyst 3850 series:
- Configuration manual (58 pages) ,
- Hardware installation manual (146 pages)
Table of Contents
Advertisement
Configuring SSM
•
•
•
•
•
•
•
•
•
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for Configuring SSM
The following are the prerequisites for configuring source-specific multicast (SSM) and SSM mapping:
• Before you configure SSM mapping, you must perform the following tasks:
OL-32598-01
Finding Feature Information, page 259
Prerequisites for Configuring SSM, page 259
Restrictions for Configuring SSM, page 260
Information About SSM and SSM Mapping, page 261
How to Configure SSM and SSM Mapping, page 267
Monitoring SSM and SSM Mapping, page 279
Configuration Examples for SSM and SSM Mapping, page 280
Additional References, page 284
Feature History and Information for SSM, page 286
Bug Search Tool
◦ Enable IP multicast routing.
◦ Enable PIM sparse mode.
◦ Configure SSM.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
C H A P T E R
and the release notes for your platform and software release. To
11
259
- Quick Links:
- Prerequisites for Using the Web Gui
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
