Controlling Sa Messages Originated By An Rp For Local Sources - Cisco Catalyst 3650 Configuration Manual
Ip multicast routing
Hide thumbs
Also See for Catalyst 3650:
- Hardware installation manual (118 pages) ,
- Manual (120 pages) ,
- Command reference manual (90 pages)
Table of Contents
Advertisement
Configuring MSDP
Example: Configuring MSDP Mesh Groups, on page 212
Controlling SA Messages Originated by an RP for Local Sources
Perform this task to control SA messages originated by an RP by enabling a filter to restrict which registered
sources are advertised in SA messages.
For best practice information related to configuring MSDP SA message filters, see the
Note
Discovery Protocol SA Filter Recommendations
SUMMARY STEPS
1. enable
2. configure terminal
3. ip msdp redistribute [list access-list] [asn as-access-list] [route-map map-name]
4. exit
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
ip msdp redistribute [list access-list] [asn
as-access-list] [route-map map-name]
Example:
Device(config)# ip msdp redistribute
route-map customer-sources
Step 4
exit
Example:
Device(config)# exit
OL-29890-01
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enables a filter for MSDP SA messages originated by the local
device.
Note
Exits global configuration mode and returns to privileged EXEC
mode.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Controlling SA Messages Originated by an RP for Local Sources
tech note.
The ip msdp redistribute command can also be used to
advertise sources that are known to the RP but not
registered. However, it is strongly recommended that you
not originate advertisements for sources that have not
registered with the RP.
Multicast Source
195
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
