How To Configure Class-Based Policing; Configuring A Traffic Policing Service Policy - Cisco ASR 900 Series Configuration Manual
Aggregation services router qos: policing and shaping configuration guide, cisco ios xe release 3s
Hide thumbs
Also See for ASR 900 Series:
- Release notes (310 pages) ,
- Manual (174 pages) ,
- Configuration manual (172 pages)
Table of Contents
Advertisement
Class-Based Policing
The following are not supported on the Cisco ASR 900 RSP3 Module:
Note
• Class-based policing on subinterfaces
• Policy-map on BDI interface
• Egress Policer
How to Configure Class-Based Policing
Configuring a Traffic Policing Service Policy
SUMMARY STEPS
1. enable
2. configure terminal
3. class-map [match-all | match-any] class-map-name
4. match ip precedence precedence-value
5. exit
6. policy-map policy-map-name
7. class {class-name | class-default}
8. police bps burst-normal burst-max conform-action action exceed-action action violate-action action
9. exit
10. exit
11. interface interface-type interface-number
12. service-policy {input | output} policy-map-name
13. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Purpose
Enables higher privilege levels, such as privileged EXEC mode.
QoS: Policing and Shaping Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 900 Series)
How to Configure Class-Based Policing
• Enter your password if prompted.
3
Advertisement
Table of Contents
