Configuring Hardware Dmz; Configuring Upnp - Cisco RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for RV315W:
- Administration manual (109 pages) ,
- Datasheet (9 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Networking
Configuring UPnP
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Configuring UPnP
STEP 1
STEP 2
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Configuring Hardware DMZ
The hardware DMZ feature sets the LAN8 port on the back panel to a DMZ port.
This feature is only available when you use Static IP or DHCP to connect to the
Internet.
To configure the hardware DMZ:
Click Networking > DMZ > Hardware DMZ. The Hardware DMZ page opens.
Check Enable to enable the hardware DMZ feature and set the LAN8 part on the
back panel to a DMZ port.
Click Create to create a DMZ rule.
Enter the following information:
•
Status: Check Enable to enable this DMZ rule, or check Disable to disable
this DMZ rule.
•
Public IP: Enter the public IP address.
•
WAN Interface: Select a WAN interface for this DMZ rule.
Click OK to save your settings.
To edit a hardware DMZ rule, select the corresponding rule and click the Edit icon.
To delete a hardware DMZ rule, select the corresponding rule and click the Delete
icon.
Universal Plug and Play (UPnP) allows for automatic discovery of devices that can
communicate with your RV315W.
To enable or disable UPnP on the RV315W:
Click Networking > UPnP. The UPnP page opens.
Click Enable to enable UPnP, or click Disable to disable UPnP. If UPnP is disabled,
the RV315W will not allow for automatic device configuration.
5
59
Advertisement
Table of Contents
