Cisco RV315W Administration Manual page 71
Broadband wireless vpn router
Hide thumbs
Also See for RV315W:
- Administration manual (109 pages) ,
- Datasheet (9 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
VPN
Configuring IPsec VPN Policies
STEP 1
STEP 2
STEP 3
Cisco RV315W Broadband Wireless VPN Router Administration Guide
To create a site-to-site (gateway-to-gateway) VPN policy:
Click VPN > IPsec VPN. The IPsec VPN page opens.
Click Create to create an IPsec VPN policy.
Enter the following information:
•
Enable: Check to enable the IPsec VPN policy, or uncheck to disable the
policy.
•
Policy Number: Select the identification for the IPsec VPN policy.
•
IPsec Connection Name: Enter a unique name for the IPsec VPN policy.
•
Interface: Select a WAN interface that traffic passes through over the IPsec
VPN tunnel.
•
Connection Type: Select site-to-site as the type of the VPN connection.
•
VPN Redundant: VPN Redundant allows the backup connection to be active
automatically when the connection of the remote gateway fails. Click Enable
to enable this feature and enter the following information:
-
Primary: Enter the IP address or hostname of the primary remote
gateway.
-
Backup: Enter the IP address or hostname of the secondary remote
gateway.
-
Switch from backup to primary: Enabling this feature allows the primary
VPN connection to be active automatically when the primary connection
is recovered. If you disable this feature, the backup connection still
becomes active even though the primary connection is recovered. Click
Enable to enable this feature, or click Disable to disable it. This feature is
disabled by default.
•
Local Gateway Address: Displays the IP address of the local network. In
general, the local gateway address is the public IP address obtained by the
selected WAN interface.
•
Authentication Method: The IPsec VPN uses a simple, password-based
key to authenticate. Enter the desired value that the peer device must
provide to establish a connection in the Pre-shared Key field. The pre-
shared key must be entered exactly the same here and on the remote peer.
•
Filter Method: Select one of the following options:
6
68
Advertisement
Table of Contents
